Overview

One box mounted to each CNC, with short (less than 10') RS232 connections

Quatech SSEW-100

Mount these wireless device servers on the side of the CNC where there is 110v power or inside the CNC's cabinet with an optional external antenna for a cleaner looking installation. Our devices let you use either a wired ethernet connection or an 802.11g WiFi network for optimum flexibility. Each box shows up as a regular COM port on your server computer for seamless application compatibility.

We recommend the use of a good wireless access point with your wireless DNC system. In our experience we have found that plenty of access points that are suitable for surfing the internet on a laptop just aren't reliable enough when you start getting ten or more dnc boxes communicating simultaneously in an electrically noisy environment.

The hardware will make or break a wireless DNC system. Use the wrong hardware and your CNCs could communicate slowly, drop connections, have errors in the middle of the transmision, or just not work at all. At RYM we intensively tests our wireless hardware to make sure we have the optimum combination of access point and wireless device server to ensure optimum reliability and performance. 

Features:

• A variety of models gives you one or two RS232 ports, surge suppression, or 5v power output to serial devices such as bar-code readers

• Easy to use web interface lets you configure the device from your web browser

• Supports WEP or WPA encryption

• Any Windows 2000 or later computer on your network can be configured to talk to these hubs. Control the system from a computer hidden in your network closed - or even run your DNC server in another building.

• Surge suppressed models are available

• 5 year factory warranty

• Made in America

Furthermore, there are distinct advantages to buying your DNC hubs from Refresh Your Memory. When you purchase your hubs from us you will get:

• No charge phone support for the installation and configuration of your hubs

• A single point of contact for all your DNC software and hardware

• Assistance with warranty repairs and replacement, including expedited service and a hot-swap program

Remember - we can't offer these services if you don't purchase your hardware from us!

For more information please call us at (408)224-9167 or use the Contact Us  form. And remember: your DNC Hubs are only as good as the software controlling them, so be sure to take a look at our full-featured PC-DNC plus .